Our Red Stimsonite Model C88 / C80 markers combine the durability of an injection-molded shell with a sturdy inert fill material and advanced optics to ensure high reflectivity. Red markers are typically used to mark areas where cars or vehicles are prohibited. The Red C88 Raised Pavement / Road Markers on this page are “two way” and are reflective from both directions. The markers measure 4″ x 4″ and are slightly less than 3/4″ tall. In high intensity traffic conditions, abrasion resistance is crucial to extending the service life of the marker. Our C88 markers include a long-life abrasion resistant coating to enhance the retained reflectivity of the marker. This provides the safest delineation to drivers in critical wet-night conditions.
Our Red C88 reflectors can be applied to asphalt or cement road surfaces using our Double Stick Butyl Pads or our Melt Down Thermoplastic Pads. You can also purchase epoxy locally and apply them. For wood surfaces such as railroad ties you can drill through the middle of the marker and screw them down. For large application areas you can also use hot tar which is also known as bitumen.
We sell the Red C88 Markers in 3 packages. Marker only, marker and butyl self adhesive pad and marker with melt down thermoplastic pad. (See picture at bottom of page)
Our double sided 4 x 5 butyl pads are meant to be either temporary or for low traffic applications. They are simple to install. Just peel and stick.
Our melt down 5 x 5 thermoplastic pads are more permanent. To install just heat the surface, lay down the pad, continue heating until the pad is melted and then lightly press the marker into the center of the thermoplastic and let cool.